The 29p bathroom hack experts say could help prevent £200 mould repair bills
Black mould around baths and showers is becoming a familiar frustration in many UK homes, particularly during colder months when windows stay shut and moisture lingers indoors for longer.
From dark marks around shower trays to blackened silicone near baths and sinks, many homeowners find themselves repeatedly cleaning bathroom sealant only for the mould to return a few weeks later.
Condensation and poor ventilation remain some of the biggest causes of household damp problems in the UK, especially during winter when homes naturally trap more warm air and humidity.
According to Guy Chapman, Silicone Supplier at United Silicones, bathroom sealant is often one of the first places excess moisture begins to show itself.
“A lot of people think mould on silicone is simply down to dirt or poor cleaning, but most of the time it comes back because moisture is sitting in the room for too long.”
“Bathrooms generate a huge amount of steam in a short space of time, especially after hot showers. If there isn’t enough airflow, that moisture settles on colder surfaces and mould starts developing surprisingly quickly.”
He said one of the biggest mistakes homeowners make is sealing bathrooms up immediately after use.
“It’s very common for people to finish showering, close the shower door and leave the bathroom shut while everything is still damp.”
“That warm, humid air then just sits there, which creates ideal conditions for mould around sealant.”
Guy also shared a little-known low-cost trick that can help absorb excess moisture in smaller bathrooms.
“One surprisingly effective option is using basic non-clumping cat litter to absorb moisture from the air.”
“You can place a small bowl of it near areas where condensation regularly builds up, or even fill an old sock with it and leave it near the bath or window.”
He said the hack can cost as little as 29p to 50p, depending on the amount used, making it a much cheaper preventative measure than repeatedly replacing mould-damaged silicone.
“It’s obviously not a replacement for proper ventilation.”
“But in smaller bathrooms, or homes without windows, it can genuinely help reduce lingering dampness between showers.”
Guy said once mould begins penetrating the sealant itself, cleaning becomes much less effective.
“If the silicone stays dark even after cleaning, or the mould keeps coming back quickly, that usually means it has worked deeper into the material.”
“At that stage, replacing it with a sanitary-grade anti-fungal silicone is often the best long-term fix.”
He added that replacing damaged bathroom sealant is far more expensive than preventing the problem in the first place.
“Even a simple resealing job can easily cost significantly more than people expect once labour and materials are involved.”
“That’s why prevention is always the better option wherever possible.”
Guy recommends:
- Using extractor fans during and after showers
- Leaving shower doors or screens open afterwards
- Opening windows where possible
- Wiping moisture from tiles and sealant
- Cleaning regularly to prevent residue build-up
“A lot of bathroom mould problems come down to trapped moisture and airflow.”
“Usually it’s the small habits people don’t think about every day that make the biggest difference over time.”